PlanetZ forums - scopeusers.com

If you have to deal with holes, this thing is really useful:
https://eleshop.eu/desolderingstation-zd-915.html
It‘s crap from a professional pov, but does a good job on occasional use.
(same item is sold under various brands)

Dunno about the 25, but 47 is a common capacity value (microFarad) and 6V suggests voltage. Which results in middle row capacity and bottom row voltage. The caps are SMD types supposed to be applied to solder pads. The original ones are a pain to solder by hand, but a similar style version with ...

Sorry for missing this detail, but it should have been obvious from your original post already: you do the control via a hardware dial and in that case the midi transmission line has to considered, too :oops: Cable whip connection and opto-coupler on board, iirc I‘ve had fails on both, very few over ...

The machiones don´t run simultaneously all the time here,- I power up what and when I need. :) I‘ve also developed this habit. When energy prices were 1/3 of current figures (and my revenues significantly higher), I used to run the whole setup (often 24/7). Now I even consider which rack units are a ...

To each his/her own... I couldn‘t be happier with my Asus 5 slot Pentium4 mobile running 3 Pulsar-2 on their own interrupt. (at a humble 2 ghz, Win 7/32 with no internet connection, no updates). Even lower specs on my G4/800, MacOS 9, with it’s 1GB system drive (an industrial SSD plugged into the IDE ...

Ok, two and a half year old stock...
(just wanted to indicated they are not refurbished)

6 DSP is a very tight modular budget. I have 18 and would describe it as „sufficient“, good workhorse, but far from powerful.
(and I‘m humble on polyphony, rarely using more than 2 voices)

If your budget allows, it seems Sonic Core still has some 6 DSP boosters (new old stock) for less than $300.

I just tried it on Scope 5.1, Win7/32 with same result on Inferno. No problem with a Flexor LP4 Legend filter in Mod2 shell (as the only module of the patch). Flexor is version 3. Iirc ages ago there was an optimization of parameter control (interpolation against stepping). Maybe the midi section of ...

It‘s the top 2 in the row of caps you mentioned. Just unsolder and then solder in switched order, which will make the left channel come back... IF the cap is faulty or connection was broken. In the latter case both channels will be up again because you healed the broken connection. That‘s a rel ...

Did the fail happen in the middle of a session without plugging the output connector ? If it has been plugged frequently, the socket is worth checking. It‘s the upper one of the 2 TRS sockets and you may solder a temporary cable to the big connectors on the backside. (the 2 big spots at the end of t ...

That it explains it... totally forgot about V1 :D (but will check specs) There might be an option to exchange the 2 host connection cards (assuming the slot system is identical). With Scope I have no problems regarding heat, the PC is the bottom layer of my rack with open top and 1 empty unit above ...

I feel similarly well covered by existing Scope tools as Liquid EDGE, and still haven‘t exploited the system to it‘s full capabilities yet. Tbh the main „flaw“ I experience is not sound, but sometimes control (GUI and midi). Of course new releases would be cool, but regarding PCI cards one has to fac ...

no latency issues with Magmas generally, but reduced PCI capacity will be the limitation. I just happened to get a 7 slot Magma box (with Digidesign cards intended as spare) and took the opportunity to run it with 3 Pulsar II boards on the Asus P4C800 (Intel 875) under Win7/32. It installed ...

No need to drop all... VDat and the STS Samplers are at least 90% of native Win code, but an old version. (dunno which exactly, but certainly not easy to port to any current Win environment) These CAN be run in 32bit Win7 if you like (or need) them, on bargain hardware. There are tons of outdated ...

... interestingly, VDATs didn't want to be cascaded from the same clock and even threw some error that it can't be done but nevertheless functioned AND the second VDAT was also in sync with the first one and the Alesis deck! Imho that‘s just a visual flaw. If the Adat Sync is received once, it‘s app ...

That Scope minefield is quickly sorted by a bunch of Adat connections, as mentioned numerous times ;) RME provides a Digiface with 32 io channels in the $400 range to be connected to any current Mac/Win system. You (and me) cannot expect anyone to be that stupid to transfer the old VDat environment ...

1 microFarad, 50V would make sense at that position (Vcc2 Gnd).

Looks really good and most of all it avoids the angle dependent display view

... We’re at the endpoint where iPad apps are scavenging the market. Imho it‘s not the endpoint yet. There seems to be a huge amount of mini-DSP hardware out there, atm mainly for the pedal and Eurorack scene, way more affordable than the classic Motorola and Sharc (development) environments and low ...

Since I get Plugin Boutique‘s ads at least 3 times a week in my mail, the whole business seems to run nuts.
Sellout prices everywhere, no opportunity to announce another sale left out.
There is so much sh*t flooding the market... must be tough to get reasonable revenues.